Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT MAP LIGHT ASSEMBLY


B117880
  1. Check that the light operates properly..

    OK:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    ON
    Light comes on
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    OFF
    Light does not come on

    If the result is not as specified, replace the light assembly.