SEAT HEATER SWITCH > INSPECTION |
| 1. INSPECT SEAT HEATER SWITCH LH |
![]() |
Measure the resistance of the seat heater switch when the switch is operated.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (IG) - 4 (LH) | ON | Below 1 Ω |
| 3 (IG) - 4 (LH) | OFF | 10 kΩ or high |
Check that the seat heater switch indicator light illuminates when the switch is operated.
| Tester Connection | Switch Condition | Specified Condition |
| Battery positive (+) → 3 (IG) Battery negative (-) → 6 (E) | ON | Illuminates |
Check that the seat heater switch illuminates.
| Tester Connection | Switch Condition | Specified Condition |
| Battery positive (+) → 1 (ILL+) Battery negative (-) → 2 (ILL-) | Always | Illuminates |
| 2. INSPECT SEAT HEATER SWITCH RH |
![]() |
Measure the resistance of the seat heater switch when the switch is operated.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (IG) - 4 (RH) | ON | Below 1 Ω |
| 3 (IG) - 4 (RH) | OFF | 10 kΩ or high |
Check that the seat heater switch indicator light illuminates when the switch is operated.
| Tester Connection | Switch Condition | Specified Condition |
| Battery positive (+) → 3 (IG) Battery negative (-) → 6 (E) | ON | Illuminates |
Check that the seat heater switch illuminates.
| Tester Connection | Switch Condition | Specified Condition |
| Battery positive (+) → 1 (ILL+) Battery negative (-) → 2 (ILL-) | Always | Illuminates |