Home › BODY › SEAT › SEAT HEATER SWITCH

SEAT HEATER SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE SWITCH BASE


B084837E02
  1. Detach the 8 claws.

  1. Disconnect all connectors and remove the switch base.



3. REMOVE SEAT HEATER SWITCH LH
  1. Detach the 2 claws and remove the switch.



4. REMOVE SEAT HEATER SWITCH RH
  1. Detach the 2 claws and remove the switch.