Home › BODY › SEAT › FRONT SEAT CUSHION HEATER

FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    B122841E01
  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A2 - B2
    Seat cushion heater temperature 20°C (68°F)
    Below 1 Ω

    If the result is not as specified, replace the seat cushion heater.

  1. Heat the thermostat with a light.

  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - A2
    Seat cushion heater temperature 20°C (68°F)
    7.2 to 8.8 Ω
    A1 - A2
    Seat heater temperature above 40°C (104°F)
    10 kΩ or higher

    If the result is not as specified, replace the seat cushion heater.



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    B122841E01
  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A2 - B2
    Seat cushion heater temperature 20°C (68°F)
    Below 1 Ω

    If the result is not as specified, replace the seat cushion heater.

  1. Heat the thermostat with a light.

  1. Measure the resistance of the seat cushion heater.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - A2
    Seat cushion heater temperature 20°C (68°F)
    7.2 to 8.8 Ω
    A1 - A2
    Seat heater temperature above 40°C (104°F)
    10 kΩ or higher

    If the result is not as specified, replace the seat cushion heater.