DTC 43 ABS Control System Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| 43 | Malfunction in the anti-lock brake system. | Anti-lock brake system |
| 1.CHECK ANTI-LOCK BRAKE SYSTEM |
Clear the DTC(s) (Click here).
Turn the ignition switch to ON.
Check if the same DTC is recorded (Click here).
| Result | Proceed to |
| DTC relating to anti-lock brake system not output | A |
| DTC relating to anti-lock brake system output | B |
|
| ||||
| A | |
| 2.RECONFIRM DTC |
Turn the ignition switch off.
Clear the DTC(s) (Click here).
Start the engine.
Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.
Check if the same DTC is recorded (Click here).
| Result | Proceed to |
| DTC 43 not output | A |
| DTC 43 output | B |
|
| ||||
| A | ||
| ||