Home › ENGINE ยท 2KD-FTV › INTAKE › TURBOCHARGER (w/ EGR Cooler)

TURBOCHARGER (w/ EGR Cooler) > DISASSEMBLY

for Preparation Click here



1. REMOVE ACTUATOR ASSEMBLY WITH BRACKET (for Vacuum Controlled Actuator)
  1. Remove the actuator hose.

  1. Using SST, apply pressure to the actuator.

    SST
    09992-00242  

    NOTICE:
    Never apply more than 147 kPa (1.50 kgf/cm2, 21.2 psi) of pressure to the actuator.



    A148173
  1. Remove the 2 bolts, washers, E-ring and actuator.