VACUUM REGULATING VALVE (w/ EGR Cooler) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
![]() |
Remove the 3 bolts, 2 nuts and engine cover.
| 3. REMOVE GAS FILTER |
![]() |
Disconnect the 2 vacuum hoses.
Remove the bolt and gas filter with the gas filter bracket.
| 4. REMOVE ELECTRIC VACUUM REGULATING VALVE |
![]() |
Disconnect the connector.
![]() |
Disconnect the 4 vacuum hoses.
![]() |
Remove the 2 bolts and electric vacuum regulating valve.