Home › ENGINE · 1KD-FTV › FUEL › COMMON RAIL (w/ EGR Cooler)

COMMON RAIL (w/ EGR Cooler) > INSPECTION

for Preparation Click here



1. INSPECT COMMON RAIL ASSEMBLY


    A075928E01
  1. Measure the resistance between the terminals of the pressure sensor.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    25°C (77°F)
    16.4 kΩ or less
    5 - 4
    25°C (77°F)
    16.4 kΩ or less
    1 - 2
    25°C (77°F)
    3 kΩ or less
    6 - 5
    25°C (77°F)
    3 kΩ or less

    If the result is not as specified, replace the common rail assembly.



    A076655E01
  1. Measure the resistance of the Pressure discharge valve.

    Standard resistance:
    0.85 to 1.05 Ω at 20°C (68°F)

    If the result is not as specified, replace the common rail assembly.