Home › ENGINE · 2KD-FTV › FUEL › COMMON RAIL (w/ EGR Cooler)

COMMON RAIL (w/ EGR Cooler) > INSPECTION

for Preparation Click here



1. INSPECT COMMON RAIL ASSEMBLY


    A062213E11
  1. Measure the resistance between the terminals of pressure sensor.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    25°C (77°F)
    16.4 kΩ or less
    2 - 3
    25°C (77°F)
    3 kΩ or less

    If the result is not as specified, replace the common rail assembly.