Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)

FRONT SEAT ASSEMBLY (for Power Seat) > INSTALLATION

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL FRONT SEAT ASSEMBLY
  1. Place the front seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the connector under the seat.

  1. Temporarily install the front seat assembly with the 4 bolts.

  1. Operate the power seat switch (slide switch) to move the seat to the rearmost position.



    B207075E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Operate the power seat switch (slide switch) to move the seat to the foremost position.



    B207074E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. INSTALL OUTER SEAT TRACK BRACKET COVER


    B108449E03
  1. Attach the 2 claws in the order shown in the illustration to install the cover.

    NOTICE:
    Be careful not to damage the claws.



3. INSTALL INNER SEAT TRACK BRACKET COVER


    B108448E03
  1. Attach the 2 claws in the order shown in the illustration to install the cover.

    NOTICE:
    Be careful not to damage the claws.



4. INSTALL FRONT SEAT HEADREST ASSEMBLY
  1. Install the headrest.



5. INSPECT FRONT SEAT ASSEMBLY
  1. Check the power seat operation (Click here).