Home › BODY › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE FRONT SEAT ASSEMBLY
  1. Remove the front seat assembly (Click here).



2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    B207076E01
  1. Apply protective tape around the cushion shield.

  1. Using a screwdriver, detach the 2 claws and remove the knob.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B207077E01
  1. Using a screwdriver, detach the 4 claws and remove the knob.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE FRONT SEAT CUSHION SHIELD RH


    B207078
  1. Remove the 2 screws.



    B207039
  1. Remove the 3 screws.

  1. Detach the claw and guide.

  1. Remove the cushion shield.



5. REMOVE FRONT POWER SEAT SWITCH


    B207080
  1. Remove the 3 screws.

  1. Disconnect the connector and remove the switch.