Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CURTAIN SHIELD AIRBAG ASSEMBLY

CURTAIN SHIELD AIRBAG ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



2. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove the roof headlining assembly (Click here).



3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH


    B211465
  1. Disconnect the connector as shown in the illustration.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



  1. Remove the 9 bolts and curtain shield airbag.


    B210352