Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER
  1. Remove the front bumper cover (Click here).



2. REMOVE TYPE1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH


    E119628
  1. Extend the headlight washer nozzle.



    B182297
  1. Detach the 2 claws and remove the washer nozzle.



3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    B210371
  1. Disconnect the headlight washer hose.

  1. Remove the bolt.

  1. Detach the 2 claws and remove the headlight washer actuator sub-assembly.