Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL SWITCH

CLUTCH PEDAL SWITCH > ADJUSTMENT

for Preparation Click here



1. ADJUST CLUTCH SWITCH ASSEMBLY
  1. Loosen the adjusting nut.



    C223751E01
  1. Adjust the switch position so that the clearance labeled A in the illustration, between the clutch switch and cushion, is within the specified range. Then, tighten the adjusting nut.

    Standard Clearance A:
    0.6 to 1.0 mm (0.0236 to 0.0394 in.)

    Torque:
    16 N*m{ 160 kgf*cm , 12 ft.*lbf }

    NOTICE:
    Before performing the clutch switch assembly adjustment, adjust the pedal free play (Click here).