Home › DRIVE LINE › DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY (for DANA Made)

REAR DIFFERENTIAL CARRIER ASSEMBLY (for DANA Made) > REMOVAL > Preparation



EQUIPMENT
Brass bar
-
Chisel
-
Dial indicator
-
Feeler gauge
-
Hammer
-
Micrometer
-
Needle nose pliers
-
Plastic hammer
-
Press
-
Red lead
-
Screwdriver
-
Tape
-
Torque wrench
-
Vernier calipers
-


LUBRICANT / Front differential
Item
Capacity
Oil grade
Classification
w/ A.D.D.
1.60 to 1.70 liters (1.69 to 1.80 US qts, 1.40 to 1.50 Imp. qts.)
Hypoid gear oil API GL-5 or equivalent
Above-18°C (0°F): SAE 90
Below-18°C (0°F): SAE 75W-90
w/o A.D.D.
1.40 to 1.50 liters (1.48 to 1.59 US qts, 1.23 to 1.31 Imp. qts.)
Above-18°C (0°F): SAE 90)
Below-18°C (0°F): SAE 85W-90

LUBRICANT / Rear differential (TMT made)
Item
Capacity
Oil grade
Classification
2WD
3.15 to 3.25 liters (3.30 to 3.43 US qts, 2.77 to 2.86 Imp. qts.)
Hypoid gear oil API GL-5 or equivalent
Above-18°C (0°F): SAE 90
Below-18°C (0°F): SAE 85W-90
2WD (for LSD)
Hypoid gear oil LSD API GL-5 or equivalent
4WD
3.30 to 3.40 liters (3.49 to 3.59 US qts, 2.90 to 2.99 Imp. qts.)
Hypoid gear oil API GL-5 or equivalent
4WD (for LSD)
Hypoid gear oil LSD API GL-5 or equivalent

LUBRICANT / Rear differential (TSAM made)
Item
Capacity
Oil grade
Classification
2WD and made for DANA
2.30 to 2.40 liters (2.43 to 2.54 US qts, 2.02 to 2.11 Imp. qts.)
Hypoid gear oil API GL-5 or equivalent
Above-18°C (0°F): SAE 90
Below-18°C (0°F): SAE 85W-90
4WD and Pre-runner
2.40 to 2.50 liters (2.54 to 2.64 US qts, 2.11 to 2.20 Imp. qts.)
2WD (for LSD)
3.15 to 3.25 liters (3.30 to 3.43 US qts, 2.77 to 2.86 Imp. qts.)
Hypoid gear oil LSD API GL-5 or equivalent
4WD (for LSD)
3.30 to 3.40 liters (3.49 to 3.59 US qts, 2.90 to 2.99 Imp. qts.)
w/ Differential lock
2.85 to 2.95 liters (3.01 to 3.12 US qts, 2.51 to 2.60 Imp. qts.)
Hypoid gear oil API GL-5 or equivalent
2 Pinion type
2.90 to 3.00 liters (3.07 to 3.17 US qts, 2.55 to 2.64 Imp. qts.)


RECOMMENDED TOOLS
I002297
09011-12301
Socket Wrench 30 mm
-
I000322
09031-00030
Pin Punch
-
I001236
09044-00010
Torx Socket E14
-
I000114
09905-00012
Snap Ring No.1 Expander
-
I000115
09905-00013
Snap Ring Pliers
-

HINT:
"Torx" is a registered trademark of Textron Inc.



SSM
Toyota Genuine Adhesive 1360K, Three Bond 1360K or equivalent
-
Toyota Genuine Seal Packing 1281 Three Bond 1281 or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-