FUEL SYSTEM > GENERAL



OUTLINE
  1. A common-rail system is used in the fuel injection system.

  2. An HP3 type supply pump, which is compact and lightweight, is used.

  3. An injector compensation value and a Quick Response (QR) code are printed on the injector to achieve high-precision control.

  4. A fuel filter assembly, in which the fuel filter element alone can be replaced, is used.

  5. A fuel filter warning switch, which turns on or off when the internal vacuum of the filter increases, is provided in the fuel filter assembly.

  6. A fuel cooler made of aluminum is used.

  7. A fuel tank made of single-layer plastic is used.