EMISSION CONTROL SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
The main components of the emission control system are as follows:
| Component | Quantity | Function |
| Oxidation Catalyst* | 1 | Cleans the exhaust gas particulates, HC and CO. |
| ECM | 1 | Controls the emission control system based on signals from each sensor. |
| Electric EGR Control Valve Assembly | 1 | Actuated by the ECM via the E-VRV, this valve controls the flow rate of EGR gas. |
| Diesel Throttle Valve | 1 | Actuated by the ECM, this valve controls the flow rate of EGR gas. |
| SYSTEM CONTROL |
EGR System
Based on the signals received from the sensors, the ECM determines the EGR volume via the electric EGR control valve assembly in accordance with the engine condition.
| FUNCTION |
EGR System
This system is designed to help reduce and control NOx formation due to a reduction of peak temperature in the engine combustion chamber, which is accomplished by the introduction of an amount of inert gas into the intake manifold.
| CONSTRUCTION |
Oxidation Catalyst (Models Compliant with EURO 2 Emission Regulations)
An oxidation catalyst is used to clean the exhaust gas particulates, HC, and CO.

| *1 | Oxidation Catalyst | - | - |
Electric EGR Control Valve Assembly
A vacuum actuated type electric EGR control valve assembly is used.
The electric EGR control valve assembly is provided midstream in the intake air passage. By cooling the electric EGR control valve assembly in this manner, a greater volume of exhaust gas can be processed.

| *1 | Electric EGR Control Valve Assembly | *2 | Vacuum Port |
| *3 | EGR Valve | *4 | Air Port |
| *a | From Diesel Throttle Body | *b | To Intake Manifold |
| *c | From EGR Pipe Sub-assembly | - | - |
![]() | Intake Air | ![]() | EGR Gas |
| OPERATION |
EGR System
By sensing the engine driving conditions, the ECM electrically operates the E-VRV (for EGR valve control) and VSV (for EGR valve close) which control the magnitude of vacuum introduced into the diaphragm of the electric EGR control valve assembly. In addition, the ECM controls the diesel throttle valve opening position using the throttle control motor. As a result, the amount of recirculating exhaust gas is regulated. EGR valve opening lift is controlled by modulated negative pressure.
The VSV (for EGR valve close) is activated when the EGR control is stopped, in order to introduce the atmospheric pressure to the diaphragm of electric EGR control valve assembly and improve EGR valve closure response to maintain driveability.

| *A | Models Compliant with EURO 2 Emission Regulations | - | - |
| *1 | Engine | *2 | EGR Passage in Cylinder Head |
| *3 | Exhaust Manifold | *4 | Oxidation Catalyst |
| *5 | Electric EGR Control Valve Assembly | *6 | EGR Valve |
| *7 | EGR Pipe Sub-assembly | *8 | Vacuum Damper |
| *9 | VSV (for EGR Valve Close) | *10 | Throttle Position Sensor |
| *11 | Diesel Throttle Valve | *12 | Throttle Control Motor |
| *13 | Vacuum Pump | *14 | E-VRV (for EGR Valve Control) |
| *15 | ECM | *16 | Atmospheric Pressure Sensor |
| *17 | Crank Position Sensor | *18 | Accelerator Pedal Position Sensor |
| *19 | Engine Coolant Temperature Sensor | *20 | Turbo Pressure Sensor |
| *21 | Intake Air Temperature Sensor | *22 | Intake Mass Air Flow Meter Sub-assembly |
![]() | Exhaust Gas | ![]() | Intake Air |