COOLING SYSTEM > GENERAL |
| OUTLINE |
The cooling system uses a pressurized forced circulation system with a pressurized reservoir tank.
The pressurized reservoir tank is used to prevent the engine coolant from deteriorating upon contact with external air.
A thermostat with a bypass valve is located on the water inlet housing to maintain suitable temperature distribution in the cooling system.
An aluminum radiator core is used for weight reduction.
A water-cooled type engine oil cooler is used.
Toyota Genuine Super Long Life Coolant (SLLC) is used.

| *1 | Reservoir Tank | *2 | Radiator Assembly |
| *3 | Thermostat | *4 | Oil Cooler |
| SPECIFICATION |
Engine Coolant
Toyota Genuine SLLC is used. Maintenance intervals are as shown in the table below:
| Engine Coolant Type | Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids.) Do not use plain water alone. | |
| Maintenance Intervals | First Time | 160000 km (100000 miles) |
| Subsequent | Every 80000 km (50000 miles) | |
| Color | Pink | |
Thermostat
| Thermostat Opening Temperature | 80°C to 84°C (176°F to 183°F) |