METER / GAUGE SYSTEM > DETAILS |
| FUNCTION |
Buzzer Function
The table below shows the warning and reminder functions of the buzzer in the combination meter assembly:
| Item |
|
Front Seat Belt Warning System
When the ignition switch is ON, this system detects the condition of the seat belts based on the signals from the driver and front passenger seat belt buckle switches and the occupant detection sensor.
If the driver and front passenger seat belt buckle switches are off at this time, the front seat belt warning light will blink.
Occupant Detection Sensor
| CONSTRUCTION |
Accessory Meter Assembly
An accessory meter assembly is used, which can show the cruise information display.

| *1 | INFO. Switch | *2 | Front Passenger Seat Belt Warning Light |
| *3 | RESET Switch | - | - |
The accessory meter assembly has the following functions:
| Function | Outline |
| Clock and Outside Temperature Display |
|
| Cruise Information Display | In the cruise information display, 6 types of information can be displayed.
|
| Front Passenger Side Seat Belt Warning | Displays the front passenger seat belt warning light. |
The display of the accessory meter assembly undergoes the following transitions:

| No. | Condition |
| *1 | Pressing the INFO. switch for less than 2.3 seconds |
| *2 | Pressing the RESET switch for less than 0.8 seconds |
| *3 | Pressing the INFO. switch for 2.3 seconds or more |

| No. | Condition |
| *1 | Pressing the INFO. switch for 2.3 seconds or more |
| *2 | Pressing the INFO. switch for less than 2.3 seconds or 6 seconds of no operation |
| *3 | Pressing the RESET switch for less than 0.8 seconds |