ENGINE UNIT > GENERAL



OUTLINE
  1. The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.

  2. On this engine, the Variable Valve Timing-intelligent (VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.

  3. The 2TR-FE engine is available for use with leaded gasoline for optional equipment.


SPECIFICATION

No. of Cyls. and Arrangement
4-cylinder, In-line
Valve Mechanism
16-valve DOHC, Chain Drive (with VVT-i)
Combustion Chamber
Pentroof Type
Manifolds
Cross-flow
Fuel System
Sequential Multiport Fuel Injection (SFI)
Ignition System
Direct Ignition System (DIS)
Displacement
2694 cm3 (164.4 cu. in.)
Bore x Stroke
95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio
9.6 : 1
Max. Output [SAE-NET]
118 kW @ 5200 rpm
Max. Torque [SAE-NET]
241 N*m @ 3800 rpm
Valve Timing
Intake
Open
0° to 35° BTDC
Closed
64° to 29° ABDC
Exhaust
Open
44° BBDC
Closed
8° ATDC
Spark Plug
Manufacturer
DENSO
Type
K20HR-U11
Plug Gap
1.0 mm to 1.1 mm (0.0394 in. to 0.0433 in.)
Firing Order
1 - 3 - 4 - 2
Research Octane Number
91 or higher
Emission Regulation
EURO 2*2
-*3
Engine Service Mass (Reference)*1
157 kg (346 lb)

HINT:
*1: Weight shows the figure with oil and coolant fully filled.
*2: Models with unleaded gasoline engine
*3: Models with leaded gasoline engine


W103640E01


MAIN FEATURES
  1. This engine has been able to achieve the following performance features through the use of the items listed below:

    1. High performance and fuel economy

    2. Low noise and vibration

    3. Lightweight and compact design

    4. Good serviceability

    5. Clean emissions

      Item
      (1)
      (2)
      (3)
      (4)
      (5)
      Engine Proper
      A cylinder head cover made of plastic is used.
      -
      ○
      ○
      -
      -
      A taper squish shape is used for the combustion chamber.
      ○
      -
      -
      -
      ○
      2 balance shafts are used.
      -
      ○
      -
      -
      -
      The piston skirt is coated with resin.
      ○
      ○
      -
      -
      -
      A No. 1 oil pan made of aluminum alloy is used.
      ○
      ○
      ○
      -
      -
      Valve Mechanism
      Timing chains and chain tensioners are used.
      ○
      -
      ○
      ○
      -
      Valve lash adjuster assemblies are used.
      ○
      ○
      -
      ○
      ○
      Valve rocker arm sub-assemblies are used.
      ○
      -
      -
      -
      ○
      Intake and Exhaust System
      An intake manifold made of plastic is used.
      -
      -
      ○
      -
      -
      A linkless-type throttle body is used.
      -
      -
      ○
      ○
      -
      A Three-Way Catalysts (TWCs) are used.*1
      -
      -
      -
      -
      ○
      Fuel System
      Long nozzle, 12-hole type*1 or 4-hole type*2 fuel injectors with a high atomizing performance are used.
      ○
      -
      -
      -
      ○
      Quick connectors are used to connect the fuel hose with the fuel pipe.
      -
      -
      -
      ○
      -
      Ignition System
      Long-reach type spark plugs are used.
      ○
      -
      -
      -
      -
      Serpentine Belt Drive System
      A serpentine belt drive system is used.
      -
      ○
      ○
      ○
      -
      Engine Control System
      The Electronic Throttle Control System-intelligent (ETCS-i) is used.
      ○
      -
      -
      -
      ○
      The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary.
      ○
      -
      -
      ○
      ○
      The Variable Valve Timing-intelligent (VVT-i) system is used.
      ○
      -
      -
      -
      ○

      1. *1: Models with unleaded gasoline engine
      2. *2: Models with leaded gasoline engine