FUEL SYSTEM > DETAILS



CONSTRUCTION


  1. Fuel Injector Assembly



    1. The fuel injector assembly is shaped to form a long nozzle. This shortens the distance from the fuel injector assembly to the intake valve, which prevents the fuel from adhering to the intake port walls and reduces HC exhaust emissions. Depending on the type of fuel that is used, a 12-hole type fuel injector assembly is provided.


      W102960E02


      Text in Illustration 
      *a
      View from A
      -
      -



  2. Fuel Delivery Pipe Sub-assembly



    1. The fuel delivery pipe sub-assembly is made of aluminum die-cast to reduce weight.


      W102335E01


      Text in Illustration 
      *1
      Fuel Pressure Regulator
      *2
      Fuel Delivery Pipe Sub-assembly
      *3
      Fuel Pulsation Damper
      -
      -



  3. Fuel Suction with Pump and Gauge Tube Assembly



    1. A compact fuel suction with pump and gauge tube assembly is used. Its basic components are a fuel pump and a fuel sender gauge assembly.


      W103633E01


      Text in Illustration 
      *1
      Fuel Suction with Pump and Gauge Tube Assembly
      *2
      Fuel Sender Gauge Assembly
      *3
      Fuel Pump
      -
      -