INTAKE SYSTEM > DETAILS |
| CONSTRUCTION |
Throttle Body
A linkless-type throttle body, in which the throttle position sensor and the throttle control motor are integrated, is used. It achieves excellent throttle control.
A DC motor with excellent response and minimal power consumption is used for the throttle control motor. The ECM performs the duty cycle control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the opening angle of the throttle valve.

| *1 | Throttle Position Sensor | *2 | Reduction Gear |
| *3 | Throttle Valve | - | - |
Intake Manifold
The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and improve the intake volumetric efficiency.
This intake manifold consists of three parts, which are integrated through vibration welding.

| *1 | Intake Manifold | - | - |