COOLING SYSTEM > GENERAL



OUTLINE
  1. The cooling system uses a pressurized forced-circulation system with an open air type reservoir tank.

  2. A thermostat with a bypass valve is located on the water inlet housing to maintain suitable temperature distribution in the cooling system.

  3. An aluminum radiator core is used for weight reduction.

  4. A 3-stage linear temperature-controlled fluid coupling assembly is used.

  5. A water-cooled oil cooler is used.



  6. Toyota Genuine Super Long Life Coolant (SLLC) is used.


    W104407E01


    Text in Illustration 
    *1
    Thermostat
    *2
    Radiator Assembly
    *3
    Reservoir Tank
    *4
    Oil Cooler Assembly
    *a
    From Throttle Body
    *b
    To Throttle Body
    *c
    From Heater Core
    *d
    To Heater Core


SPECIFICATION
  1. Engine Coolant

    1. Toyota Genuine SLLC is used. The maintenance intervals are as shown in the table below:

      Engine Coolant Type
      Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids). Do not use plain water alone.
      Maintenance Intervals
      First Time
      160000 km (100000 miles)
      Subsequent
      Every 80000 km (50000 miles)
      Color
      Pink

      HINT:
      SLLC is pre-mixed (40% coolant and 60% deionized water). Therefore, no dilution is needed when SLLC in the vehicle is added or replaced.

  2. Thermostat

    Thermostat Opening Temperature
    80°C to 84°C (176°F to 183°F)