AUDIO AND VISUAL SYSTEM > GENERAL



OUTLINE
  1. Audio System

    1. The audio systems shown below are provided:

      Audio System
      Audio Head Unit
      Speaker
      Base Audio System
      Radio Receiver Assembly
      6 Speakers
      Display Audio System
      Radio and Display Receiver Assembly



  2. Audio Head Unit

    1. The radio receiver assembly has an improved design that better matches the interior of the vehicle. A USB/AUX port has also been included.

    2. A high-definition Wide Video Graphics Array (WVGA) screen is used for both the radio and display receiver assembly The WVGA screen supports flick operation.

    3. Discs containing MPEG audio layer-3 (MP3) files, Windows Media Audio (WMA) files and Advanced Audio Coding (AAC) files* can be played.

      1. *: Models with display audio system



    4. Discs with the marks shown below can be played.


      Y137991E01


      Text in Illustration 
      *A
      Models with Base Audio System
      *B
      Models with Display Audio System



  3. USB/AUX Port

    1. A USB port is provided that enables the use of a USB memory stick, portable audio player (USB type), iPhone, iPod, iPod classic, iPod nano or iPod touch.



    2. Videos stored on a video capable device such as an iPod can be displayed on the radio and display receiver assembly by connecting the video capable device to the AUX port using a dedicated 4-pole AUX cable.


      Y131239E01


      Text in Illustration 
      *A
      Models with Base Audio System
      *B
      Models with Display Audio System

      HINT:
      1. In order to display video from an iPod, it is necessary to connect the iPod to the USB and AUX ports using a dedicated iPod video cable or dedicated 4-pole AUX cable and select "video sound input cable" from the "iPod settings" screen.
      2. Depending on the specifications of the 4-pole AUX cable used to connect a video cable device such as an iPod or VTR, the video function may not operate correctly. Use a dedicated 4-pole AUX cable when using the video function.
      3. iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
      4. The following iPod, iPod nano, iPod classic, iPod touch and iPhone devices can be used with this audio system.
      5. Made for
        1. iPod touch (5th generation)
        2. iPod touch (4th generation)
        3. iPod touch (3rd generation)
        4. iPod touch (2nd generation)
        5. iPod touch (1st generation)
        6. iPod classic
        7. iPod with video
        8. iPod nano (7th generation)
        9. iPod nano (6th generation)
        10. iPod nano (5th generation)
        11. iPod nano (4th generation)
        12. iPod nano (3rd generation)
        13. iPod nano (2nd generation)
        14. iPod nano (1st generation)
        15. iPhone 5
        16. iPhone 4S
        17. iPhone 4
        18. iPhone 3GS
        19. iPhone 3G
        20. iPhone
      6. Depending on differences between models or software versions etc., some models might be incompatible with this audio system.
      7. USB memory devices that meet the following specifications are supported:

        USB Communication Formats
        1. USB 2.0, Full Speed (12 Mbps)
        2. USB 2.0, High Speed (480 Mbps)*
        File System
        FAT 16/32
        Correspondence Class
        Mass Storage Class
        File Formats
        MP3, WMA, AAC*
        1. *: Models with display audio system

  4. Bluetooth Audio System

    1. The Bluetooth audio system enables users to enjoy music played on a portable player from the vehicle speakers via wireless communication.

    2. The Bluetooth specifications and profiles required for operation are as follows:

      Specification/Profile
      Version
      Bluetooth Specification
      Version 1.1 or higher*1/Version 2.0 or higher*2
      Required
      Version 2.1+EDR*1/3.0+EDR*2 or higher
      Recommended
      Profile
      Advanced Audio Distribution Profile (A2DP) Version 1.0 or higher
      Required
      Advanced Audio Distribution Profile (A2DP) Version 1.2 or higher
      Recommended
      Audio/Video Remote Control Profile (AVRCP) Version 1.0 or higher*1
      Required
      Audio/Video Remote Control Profile (AVRCP) Version 1.1 or higher*2
      Required
      Audio/Video Remote Control Profile (AVRCP) Version 1.3 or higher*1
      Recommended
      Audio/Video Remote Control Profile (AVRCP) Version 1.4 or higher*2
      Recommended

      1. *1: Models with base audio system
      2. *2: Models with display audio system



  5. Bluetooth Hands-free System

    1. The Bluetooth hands-free system allows users to make or receive a call while keeping both hands on the steering wheel when the system is linked with a Bluetooth-compatible cellular phone.

    2. The Bluetooth specifications and profiles required for operation are as follows:

      Specification/Profile
      Version
      Bluetooth Specification
      Version 1.1 or higher*1/Version 2.0 or higher*2
      Required
      Version 2.1+EDR*1/3.0+EDR*2 or higher
      Recommended
      Profile
      Hands Free Profile (HFP) Version 1.0 or higher
      Required
      Hands Free Profile (HFP) Version 1.5*1/1.6*2 or higher
      Recommended

      HINT:
      *1: Models with base audio system
      *2: Models with display audio system
      1. The operation of the interrupt call function of the Bluetooth hands-free system may vary with the Bluetooth phone or the telephone company that is used.

        Y120856
        "Bluetooth" is a trademark owned by Bluetooth SIG, Inc.
      2. Some profiles described above may not be supported by the system depending on the audio head unit that is equipped.
      3. If the specification of the connected Bluetooth phone is lower than recommended or does not support the functions required, the available functions may be limited.



    3. The user can confirm the Bluetooth connection status, signal strength and remaining battery level of the connected Bluetooth phone by using the status icons displayed on the screen. The status icons are displayed in any mode.


      Y137984E03


      Item
      Outline
      (1)
      Bluetooth connection status
      Displays the Bluetooth connection status between the audio head unit and cellular phone.
      (2)
      Cellular phone signal strength*1
      Displays the signal strength received by the cellular phone.
      (3)
      Cellular phone battery level*1, *2
      Displays the battery level of the Bluetooth connected cellular phone.

      HINT:
      *1: May not be displayed depending on the Bluetooth specifications and profiles of the cellular phone.
      *2: Models with display audio system

  6. Automatic Sound Levelizer (ASL)

    1. The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases).

      1. Vehicle speed signals are received from the combination meter assembly and used for ASL control.

  7. Steering Pad Switch Assembly

    1. Switches that the driver often uses are provided on the steering wheel for convenience.


SPECIFICATION
  1. Audio System

    Audio Head Unit
    Design
    Specification
    Radio Receiver Assembly
    Y131236
    Y137986
    Base Audio System:
    1. AM/FM Tuner
    2. CD Player
    3. CD-TEXT Display Function
    4. MP3 and WMA Playback Function
    5. iPod Operation Function
    6. USB/AUX Port
    7. Bluetooth Audio System
    8. Bluetooth Hands-free System
    9. 4-speaker System
    10. Manufacturer: FUJITSU TEN
    Y138010
    Base Audio System:
    1. AM/FM Tuner
    2. Radio Data System (RDS)
    3. CD Player
    4. CD-TEXT Display Function
    5. MP3 and WMA Playback Function
    6. iPod Operation Function
    7. USB/AUX Port
    8. Bluetooth Audio System
    9. Bluetooth Hands-free System
    10. 6-speaker System
    11. Manufacturer: FUJITSU TEN
    Radio and Display Receiver Assembly
    Y137985
    Y131237
    Display Audio System:
    1. 6.1-inch Display
    2. AM/FM Tuner
    3. CD/DVD Player
    4. CD-TEXT Display Function
    5. MP3, WMA and ACC Playback Function
    6. iPod Operation Function
    7. Stereo Jack Adapter (USB, AUX Port)
    8. Bluetooth Audio System
    9. Bluetooth Hands-free System
    10. 6-speaker System
    11. Manufacturer: PIONEER
    Y131237
    Display Audio System:
    1. 6.1-inch Display
    2. AM/FM Tuner
    3. Radio Data System (RDS)
    4. CD/DVD Player
    5. CD-TEXT Display Function
    6. MP3, WMA and ACC Playback Function
    7. iPod Operation Function
    8. Stereo Jack Adapter (USB, AUX Port)
    9. Bluetooth Audio System
    10. Bluetooth Hands-free System
    11. 6-speaker System
    12. Manufacturer: PIONEER



  2. 4-speaker System


    Y112658E01


    Location
    Speaker Type
    Caliber
    Impedance
    Input Range
    *1
    Front Speaker x 2
    160 mm (6.3 in.)
    4 Ω
    20 W
    *2
    Rear Speaker x 2
    160 mm (6.3 in.)
    4 Ω
    20 W



  3. 6-speaker System


    Y110076E01


    Location
    Speaker Type
    Caliber
    Impedance
    Input Range
    *1
    Tweeter x 2
    25 mm (1.0 in.)
    4 Ω
    20 W
    *2
    Front Speaker x 2
    160 mm (6.3 in.)
    4 Ω
    20 W
    *3
    Rear Speaker x 2
    160 mm (6.3 in.)
    4 Ω
    20 W


MAIN FEATURES


  1. MirrorLinkTM Function

    1. To utilize the MirrorLinkTM function, it is necessary to connect a compatible smartphone* to the display and radio receiver assembly using a USB cable.



    2. After a connection is established, the screen of the smartphone is displayed on the radio and display receiver assembly. Using this screen, the user can operate applications installed on the smartphone and listen to the audio of the smartphone via the vehicle speakers. Operation via the smartphone is also possible.

      HINT:
      *: This function is not available if the smartphone is not compliant with MirrorLinkTM of Car Connectivity Consortium.


      Y139767E01


      Text in Illustration 
      *1
      Smartphone
      *2
      Connection via USB Cable
      *a
      MirrorLinkTM Screen
      *b
      The illustration shows an example for Android.