MONITOR SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
| Component | Function |
| Rear Television Camera Assembly | Transmits a video signal representing the area behind the vehicle to the radio and display receiver assembly. |
| Radio and Display Receiver Assembly |
|
| Park/Neutral Position Switch Assembly | Sends a shift R position signal to the radio and display receiver assembly. |
| OPERATING CONDITION |
This system operates when both the following conditions have been met:
| FUNCTION |
Area Displayed on Screen
Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

| *a | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. | - | - |
Warning Message
A warning message appears at the bottom of the screen under the following conditions.
| Warning Message | Condition |
| Check surroundings for safety. | This message always appears during system operation. |
| CONSTRUCTION |
Rear Television Camera Assembly
The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).

| *1 | Wide-angle Lens | *2 | Rear Television Camera Assembly |
| FAIL-SAFE |
The table below indicates fail-safe operation when a malfunction is detected:
| Malfunctioning Part | Detection Item | Function |
| Rear Television Camera Assembly | Rear television camera assembly malfunction signal is detected. | System stops signal reception and displays a dark screen. |