CLUTCH SYSTEM > GENERAL |
| OUTLINE |
A dry type single plate clutch, operated by hydraulic pressure, is used, which is matched to the performance of each engine.
A clutch disc assembly that uses an organic solvent-free material is used to help protect the environment. In addition, the components of the clutch damper have been optimized to achieve wear resistance and reduce noise and vibration.
A turnover mechanism is used to reduce clutch pedal effort on the models with 1KD-FTV or 2KD-FTV High Version engine.
A clutch accumulator assembly is used to reduce the noise and vibrations that are transmitted to the clutch pedal on the models with 1KD-FTV, 2KD-FTV High Version or 5L-E engine.
| SPECIFICATION |
| Engine Type | 2TR-FE | 1KD-FTV | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 250 mm (9.84 in.) | 275 mm (10.83 in.) |
| Installed Load | 5900 N | 7350 N | |
| Clutch Disc | Facing Size* | 250 mm x 160 mm (9.84 in. x 6.30 in.) | 275 mm x 175 mm (10.83 in. x 6.89 in.) |
| Master Cylinder | Type | Plunger | Conventional |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Conventional | Turnover | |
| Clutch Accumulator | Without | With | |
| Engine Type | 2KD-FTV High Version | 5L-E | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 275 mm (10.83 in.) | 236 mm (9.29 in.) |
| Installed Load | 7350 N | 4410 N | |
| Clutch Disc | Facing Size* | 275 mm x 175 mm (10.83 in. x 6.89 in.) | 236 mm x 150 mm (9.29 in. x 5.91 in.) |
| Master Cylinder | Type | Conventional | Plunger |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Turnover | Conventional | |
| Clutch Accumulator | With | ← | |