CLUTCH SYSTEM > GENERAL |
| OUTLINE |
A dry type single plate clutch, operated by hydraulic pressure, is used, which is matched to the performance of each engine.
A clutch disc assembly that uses an organic solvent-free material is used to help protect the environment. In addition, the components of the clutch damper have been optimized to achieve wear resistance and reduce noise and vibration.
A turnover mechanism is used to reduce clutch pedal effort on the models with 1KD-FTV or 2KD-FTV High Version engine.
A clutch accumulator assembly is used to reduce the noise and vibrations that are transmitted to the clutch pedal.
| SPECIFICATION |
| Engine Type | 1KD-FTV | 2KD-FTV High Version | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 275 mm (10.83 in.) | ← |
| Installed Load | 7350 N | ← | |
| Clutch Disc | Facing Size* | 275 mm x 175 mm (10.83 in. x 6.89 in.) | ← |
| Master Cylinder | Type | Conventional | ← |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Turnover | ← | |
| Clutch Accumulator | With | ← | |
| Engine Type | 5L-E | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring |
| Operation | Hydraulic | |
| Clutch Cover | Size | 236 mm (9.29 in.) |
| Installed Load | 4410 N | |
| Clutch Disc | Facing Size* | 236 mm x 150 mm (9.29 in. x 5.91 in.) |
| Master Cylinder | Type | Plunger |
| Release Cylinder | Type | Non-adjustable |
| Clutch Pedal | Conventional | |
| Clutch Accumulator | With | |