AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) > SYSTEM DESCRIPTION |
| DISC PLAYER OUTLINE |
A CD player uses a laser pickup to read digital signals recorded on CDs. By converting the digital signals to analog, music and other content can be played.
Usable discs
The CD player can only play audio CDs, CD-Rs (CD-Recordable), and CD-RWs (CD-ReWritable) that have any of the following marks:

Precautions for use of discs
Cleaning
![]() |
If dirt is on the disc surface, wipe it clean with a soft dry cloth, such as an eyeglass cleaner for plastic lenses, from the inside to the outside in a radial direction.
| MP3/WMA OUTLINE |
Playable MP3 file standards
| Compatible standard | MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) |
| Compatible sampling frequency |
|
| Compatible bit rate |
|
| Compatible channel mode | Stereo, joint stereo, dual channel, monaural |
Playable WMA file standards
| Compatible standard | WMA Ver. 7, 8 and 9 |
| Compatible sampling frequency | 32, 44.1, 48 (kHz) |
| Compatible bit rate |
|
ID3 tag and WMA tag
Additional textual information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.
Additional textual information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.
Usable media
Only CD-ROMs, CD-Rs (CD-Recordable), and CD-RWs (CD-ReWritable) can be used to play MP3/WMA files.
Usable media format
Usable media format
| Disc format | CD-ROM Mode 1 and Mode 2, CD-ROM XA Mode 2 Form 1 and Form 2 |
| File format | ISO 9660 Level 1 and Level 2 (Joliet, Romeo) |
Standard and restrictions
| Maximum directory levels | 8 levels |
| Maximum number of characters for a folder name/file name | 32 characters |
| Maximum number of folders | 192 (Including empty folders, root folders, and folders that do not contain MP3/WMA files) |
| Maximum number of files on a disc | 255 (Including non-MP3/WMA files) |
File names
Only files with an extension of ".mp3" or ".wma" can be recognized and played as MP3 or WMA files.
Save MP3 or WMA files with an extension of ".mp3" or ".wma".
| RADIO DESCRIPTION |
Radio frequency band
Radio broadcasts use the radio frequency bands shown in the table below.

![]() |
Service area
The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. An FM stereo broadcast has the smallest service area, and is prone to pick up static and other types of interference such as noise.
| *a | FM (Stereo) |
| *b | FM (Monaural) |
| *c | AM |
Radio reception problems
![]() |
Phasing
AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.
| *a | Phasing |
| *b | Ionosphere |
![]() |
Multipath
Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.
| *a | Multipath |
![]() |
Fade out
Fade out is caused by objects (buildings, mountains, and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are much more difficult to deflect.
| *a | Fade Out |
Noise problem
Technicians must have a clear understanding about the noise complaint of each customer. Use the following table to diagnose noise problems.
| Radio Frequency | Noise Occurrence Condition | Presumable Cause |
| AM | Noise occurs in a specified area | Foreign noise |
| AM | Noise occurs when listening to an intermittent broadcast | An identical program transmitted from multiple towers can cause noise where the signals overlap |
| AM | Noise occurs only at night | Music beat from a distant broadcast |
| FM | Noise occurs while driving in a specified area | Multipath or phasing noise resulting from a change in FM frequency |
| USB AUDIO SYSTEM FUNCTION OUTLINE |
The No. 1 stereo jack adapter assembly is equipped with a USB terminal. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions or "iPod", it is also possible to play MP3 or WMA music files that are stored on a USB device or "iPod". In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.
USB audio system compatible model
USB Device
The following device formats can be used.
| Compatible USB device formats |
|
"iPod"
"iPod" is a trademark of Apple Inc., registered in the U.S. and other countries.
| Supported "iPod" Model | Supported Firmware Version or OS Version |
| "iPod" 5G | Ver. 1.3 |
| "iPod nano" 1G | Ver. 1.3.1 |
| "iPod nano" 2G | Ver. 1.1.3 |
| "iPod nano" 3G | Ver. 1.1.3 |
| "iPod nano" 4G | Ver. 1.0.4 |
| "iPod nano" 5G | Ver. 1.0.2 |
| "iPod nano" 6G | Ver. 1.0 |
| "iPod touch" 1G | iOS 2.1.0 |
| iOS 3.1.3 | |
| "iPod touch" 2G | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" Late 2009 (8GB) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" 3G (32GB/64GB) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPod touch" 4G | iOS 4.2.1 |
| "iPod classic" 1G | Ver. 1.1.2 |
| "iPod classic" 2G (120GB) | Ver. 2.0.1 |
| "iPod classic" 2009 (160GB) | Ver. 2.0.4 |
| "iPhone" 1G (iPhone) | iOS 2.2.1 |
| iOS 3.1.3 | |
| "iPhone" 2G (iPhone 3G) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPhone" 3G (iPhone 3GS) | iOS 3.1.3 |
| iOS 4.2.1 | |
| "iPhone" iPhone 4 | iOS 4.2.1 |
| Unsupported Models | "iPod shuffle" 1G, 2G, 3G, 4G |
| "iPod photo" 1G, 2G | |
| "iPod" 1G, 2G, 3G, 4G | |
| "iPod mini" 1G, 2G | |
| "iPad |
| ASL (AUTOMATIC SOUND LEVELIZER) FUNCTION OUTLINE |
The ASL function automatically adjusts the sound volume in order to enable the listener to hear the sound of the audio system clearly even when vehicle noise increases (as vehicle speed increases, the volume is turned up, etc.).
Vehicle speed signals are received from the combination meter and used by the ASL.