Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > CD cannot be Inserted or is Ejected Right After Insertion

for Preparation Click here


INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.

1.CHECK IF A PROPER DISC IS INSERTED
  1. Make sure that the disc is an audio disc or a disc with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred or otherwise defective.

    OK:
    Normal disc.

    HINT:
    1. Translucent or uniquely-shaped discs cannot be played.
    2. CDs with adhesive paper labels should not be played.
    3. Commercial audio CDs can be played.
    4. CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
    5. MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
    6. For details on playable CDs, refer to the Owner's Manual.



NG
CHANGE DISC
OK


2.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    The disc is properly inserted.



NG
INSERT DISC PROPERLY
OK


3.CLEAN DISC AND RECHECK


    I100151
  1. Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

    OK:
    Malfunction disappears.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
Go to step 4
OK

END 

4.REPLACE DISC AND RECHECK
  1. Replace the disc with a normal one and check that the malfunction disappears.

    OK:
    The malfunction disappears.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

END (DISC IS FAULTY)