AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) > Cellular Phone Inspection |
| 1.CHECK USAGE CONDITION |
Check that the vehicle and cellular phone meet the following conditions:
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
|
| ||||
| OK | ||
| ||
| 2.RESTART CELLULAR PHONE |
Restart the cellular phone.
Turn the ignition switch off.
Turn the ignition switch to ACC.
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
|
| ||||
| OK | ||
| ||
| 3.REGISTRATION AGAIN |
Check if the in-vehicle device can be recognized by the cellular phone.
|
| ||||
| OK | |
| 4.REGISTRATION AGAIN |
Clear all "Bluetooth" devices registered to the cellular phone and radio receiver assembly.
Register the cellular phone again.
Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
|
| ||||
| OK | ||
| ||
| 5.CHECK USING ANOTHER VEHICLE |
Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
|
| ||||
| OK | ||
| ||
| 6.CHECK USING ANOTHER CELLULAR PHONE |
Check if the system functions normally using another "Bluetooth" compatible cellular phone.
|
| ||||
| OK | ||
| ||