Home › BODY › INSTRUMENT PANEL › UPPER INSTRUMENT PANEL

UPPER INSTRUMENT PANEL > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. REMOVE METER MOUNTING BRACKET


B278235
  1. Remove the screw <B> and meter mounting bracket.



2. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


B206170
  1. Detach the 4 claws and remove the No. 2 instrument panel register.



3. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

HINT:
Use the same procedure described for the No. 2 instrument panel register.



4. REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY


B206171

HINT:
Use the same procedure for both instrument panel cup holders.

  1. Remove the 3 screws <B> and instrument panel cup holder.



5. REMOVE NO. 4 INSTRUMENT PANEL CUSHION


B206458
  1. Remove the No. 4 instrument panel cushion.



6. REMOVE NO. 3 INSTRUMENT PANEL CUSHION


B206460
  1. Remove the No. 3 instrument panel cushion.



7. REMOVE NO. 2 INSTRUMENT PANEL CUSHION


B278067
  1. Remove the No. 2 instrument panel cushion.



8. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)


    E229142
  1. Detach the 2 claws and remove the automatic light control sensor.



9. REMOVE LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)


B277375
  1. Detach the 2 claws and guide and remove the light control switch hole cover.



10. REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)


    E113038
  1. Using a screwdriver, pull out the solar sensor, and then disconnect the connector.

    HINT:
    Tape the screwdriver tip before use.