ECD SYSTEM > PRECAUTION |
| 1.INITIALIZATION AND REGISTRATION |
| Replacement Part | Utility Item |
| ECM |
|
| Engine assembly |
|
| Supply pump | Supply Pump Initialization (Click here) |
| Injector |
|
| 2.INJECTOR COMPENSATION CODE |
![]() |
When an injector is replaced, the injector compensation code must be input into the ECM .
When the ECM is replaced, all of the existing injector compensation codes must be input into the new ECM .
| 3.PILOT QUANTITY LEARNING |
When an injector is replaced, the injector compensation code must be input into the ECM and then perform the pilot quantity learning .
When the ECM is replaced, all of the existing injector pilot quantity learning values must be input into the new ECM .