Home › BRAKE › BRAKE › VACUUM PUMP (for 5L-E)

VACUUM PUMP (for 5L-E) > DISASSEMBLY

for Preparation Click here



1. REMOVE VACUUM PUMP PULLEY


    C106117
  1. Using soft jaws, place the vacuum pump in a vise, and remove the pulley lock nut and pulley.



2. REMOVE VACUUM PUMP VACUUM HOSE UNION


    F043196E01
  1. Using SST, hold the check valve assembly, and remove the union bolt, vacuum hose union and 2 gaskets.

    SST
    09922-10010  



3. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY


    F043197
  1. Remove the check valve assembly and gasket.



4. REMOVE VACUUM PUMP END COVER


    F000813
  1. Remove the 4 screws and end cover.



5. REMOVE VACUUM PUMP SHAFT


    F000814
  1. Using a plastic-faced hammer, tap out the vacuum pump shaft with bearing.



6. REMOVE STOP RING
  1. Remove the stop ring from the vacuum pump shaft.



7. REMOVE VACUUM PUMP BEARING


    F000815
  1. Using a press, press out the bearing from the rotor shaft.



8. REMOVE VACUUM PUMP BLADE


    F043221
  1. Remove the 2 screws and end plate.

  1. Remove the rotor and 5 pump blades.



9. REMOVE O-RING
  1. Remove the O-ring from the case.



10. REMOVE OIL SEAL


    F000816
  1. Using a screwdriver, remove the oil seal.