ECM > INSTALLATION |
| 1. INSTALL NO. 2 ECM BRACKET |
![]() |
Install the bracket with the 2 screws.
| 2. INSTALL NO. 1 ECM BRACKET |
![]() |
Install the bracket with the 3 screws.
| 3. INSTALL ECM |
![]() |
Install the ECM with the bolt and 2 nuts.
Connect the 4 connectors.
| 4. INSTALL 4WD CONTROL ECU |
![]() |
Install the ECU with the bolt.
Connect the connector.
| 5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Attach the 2 hinges to install the glove compartment door.
| *1 | Hinge |
![]() |
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
| *1 | Stopper |
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |