Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › ECM

ECM > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


B278058E01
  1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
    Text in Illustration 
    *1
    Stopper



    B278059E01
  1. Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge



3. REMOVE ECM WITH BRACKET


    A111703
  1. Disconnect the 4 connectors.

  1. Remove the bolt, 2 nuts and ECM.



4. REMOVE NO. 1 ECM BRACKET


    A111704
  1. Remove the 2 screws and bracket.



5. REMOVE NO. 2 ECM BRACKET


    A111705
  1. Remove the 2 screws and bracket.