Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › KNOCK SENSOR

KNOCK SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL KNOCK SENSOR


    A078438E01
  1. Install the 2 knock sensors with the 2 bolts as shown in the illustration.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 knock sensor connectors.



2. INSTALL CYLINDER HEAD
  1. Install the cylinder head (Click here).



3. INSTALL ENGINE ASSEMBLY
  1. Install the engine (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL