Home › ENGINE ยท 2TR-FE › FUEL › FUEL PUMP

FUEL PUMP > INSTALLATION

for Preparation Click here



NOTICE:
A191329
Do not disconnect the hoses indicated in the illustration.



1. INSTALL FUEL PUMP


    A191423E01
  1. Apply a light coat of gasoline to a new O-ring, and install it to the supporter of the fuel suction plate.



    A191361
  1. Install the fuel pump harness and connect the fuel pump connector.



    A191360
  1. Attach the 3 claws to install the fuel pump.



2. INSTALL NO. 1 FUEL SUB-TANK


    A191422
  1. Attach the 2 claws to install the No. 1 fuel sub-tank.



    A191358
  1. Attach the 3 claws.



    A191357
  1. Connect the 2 fuel tubes and fuel pump harness.



    A191356E01
  1. Attach the claw to the No. 1 fuel sub-tank.

  1. Attach the tube to the 2 clamps on the No. 1 fuel sub-tank.

  1. Connect the jet pump to the No. 1 fuel sub-tank.



    A191355
  1. Connect the fuel pump connector.



3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    A191328E01
  1. Set the fuel sender gauge onto the No. 1 fuel sub-tank. Then slide the fuel sender gauge downward to install it.

  1. Connect the fuel sender gauge connector.



4. INSTALL FUEL TANK ASSEMBLY
  1. Install the fuel tank to the vehicle (Click here).