Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP

FUEL PUMP > REMOVAL

for Preparation Click here



NOTICE:
A191329
Do not disconnect the hoses indicated in the illustration.



1. REMOVE FUEL TANK ASSEMBLY
  1. Remove the fuel tank from the vehicle (Click here).



2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    A191321E01
  1. Disconnect the fuel sender gauge connector.

  1. Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward.



3. REMOVE NO. 1 FUEL SUB-TANK


    A191355
  1. Disconnect the fuel pump connector.



    A191356E01
  1. Detach the 2 fuel tubes and fuel pump harness from the claws.

  1. Detach the tube from the 2 clamps.

  1. Detach the claw from the No. 1 fuel sub-tank.



    A191357
  1. Disconnect the 2 fuel tubes and fuel pump harness from the claws.



    A191358
  1. Using a screwdriver, detach the 3 claws.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.

    HINT:
    Tape the screwdriver tip before use.



    A191422
  1. Using a screwdriver, detach the 2 claws and remove the No. 1 fuel sub-tank.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE FUEL PUMP


    A191360
  1. Using a screwdriver, detach the 3 claws and disconnect the fuel pump.

    HINT:
    Tape the screwdriver tip before use.



    A191361
  1. Disconnect the fuel pump connector and remove the fuel pump harness.



    A191362E01
  1. Remove the O-ring from the fuel pump.