Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (for Built-in Type Door Control Receiver)

WIRELESS DOOR LOCK CONTROL SYSTEM (for Built-in Type Door Control Receiver) > TERMINALS OF ECU

for Preparation Click here



CHECK THEFT WARNING ECU ASSEMBLY

B119765E04

  1. Disconnect the T36 theft warning ECU assembly connector.

  2. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    T36-1 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    T36-3 (+B1) - T36-1 (E)
    L-Y - B-W
    +B (ECU-B) power source
    Always
    11 to 14 V
    T36-4 (IG) - T36-1 (E)
    R-L - B-W
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    T36-12 (+B2) - T36-1 (E)
    LG - B-W
    +B (DOOR) power source
    Always
    11 to 14 V

    1. If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the T36 theft warning ECU assembly connector.

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    L2 (T36-20) - Body ground
    L - Body ground
    Door control switch (master switch) lock output
    Door control switch (master switch) LOCK
    10 kΩ or higher
    Door control switch (master switch) OFF
    Below 1 Ω
    UL3 (T36-21) -Body ground
    L-W - Body ground
    Door control switch (master switch) unlock output
    Door control switch UNLOCK
    10 kΩ or higher
    Door control switch OFF
    Below 1 Ω
    CTY (T36-7) - Body ground
    R-L - Body ground
    All door courtesy switches except driver side door
    All doors are closed except driver side door
    10 kΩ or higher
    One or more doors are open except driver side door
    Below 1 Ω
    KSW (T36-5) - Body ground
    G-Y - Body ground
    Unlock warning switch
    No key in ignition key cylinder
    10 kΩ or higher
    Key inserted in ignition key cylinder
    Below 1 Ω
    HAZD (T36-23) - Body ground
    G-O -Body ground
    Hazard warning lights signal output
    Hazard warning lights OFF
    11 to 14 V
    Hazard warning lights ON
    Below 1 V
    SH- (T36-26) - Body ground
    B - Body ground
    Security horn signal output
    Security horn OFF
    Below 1 V
    Security horn ON
    Pulse generation

    1. If the result is not as specified, the theft warning ECU may have a malfunction.


CHECK INSTRUMENT PANEL JUNCTION BLOCK (INTEGRATION RELAY)

B123671E01

  1. Disconnect the 2A, 2D, 2L and 2O instrument panel junction block connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    GND (2D-9) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    BECU (2L-12) - GND (2D-9)
    L - W-B
    +B (ECU - B) power source
    Always
    11 to 14 V
    L1 (2A-4) - Body ground
    L - Body ground
    Door control switch (master switch) lock input
    Door control switch (master switch) LOCK
    10 kΩ or higher
    Door control switch (master switch) OFF
    Below 1 Ω
    UL1 (2D-4) - Body ground
    L-W - Body ground
    Door control switch (master switch) unlock input
    Door control switch (master switch) UNLOCK
    10 kΩ or higher
    Door control switch (master switch) OFF
    Below 1 Ω
    DCTY (2O-27) - Body ground
    R-B - Body ground
    Driver side door courtesy switch
    Driver side door closed
    10 kΩ or higher
    Driver side door open
    Below 1 Ω

    1. If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the 2A, 2D, 2L and 2O junction block connectors.

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    ACT+ (2R-28) - Body ground
    L - Body ground
    Door lock motor LOCK drive output (driver side door)
    Door control switch (master switch) or driver side door key cylinder OFF
    Below 1 V
    Door control switch (master switch) or driver side door key cylinder LOCK
    11 to 14 V
    ACT- (2R-27) - Body ground
    L-Y - Body ground
    Door lock motor UNLOCK drive output (driver side door)
    Door control switch (master switch) or driver side door key cylinder OFF
    Below 1 V
    Door control switch (master switch) or driver side door key cylinder UNLOCK
    11 to 14 V

    1. If the result is not as specified, the instrument panel junction block (relay) may have a malfunction.