Home › BODY › SEAT › FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag)

FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag) > INSTALLATION

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL FRONT SEAT ASSEMBLY
  1. Place the front seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the connectors and attach the wire harness clamp under the seat.

  1. Temporarily install the front seat assembly with the 4 bolts.

  1. Lift up the seat track handle sub-assembly LH and move the seat to the rearmost position.



    B211079E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Lift up the seat track handle sub-assembly LH and move the seat to the foremost position.



    B211078E01
  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. INSTALL FRONT SEAT HEADREST ASSEMBLY
  1. Install the front seat headrest assembly.



3. INSTALL SEAT TRACK COVER LH


    B108448E03
  1. Attach the 2 claws in the order shown in the illustration to install the seat track cover LH.

    NOTICE:
    Be careful not to damage the claws.



4. INSTALL INNER SEAT TRACK BRACKET COVER LH


    B108449E03
  1. Attach the 2 claws in the order shown in the illustration to install the inner seat track bracket cover LH.

    NOTICE:
    Be careful not to damage the claws.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



6. CHECK SRS WARNING LIGHT
(Click here)