FRONT SEAT ASSEMBLY (for Separate Seat Type) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SEAT TRACK BRACKET INNER COVER RH |
![]() |
Using a screwdriver, detach the 2 claws.
Remove the inner cover in the direction indicated by the arrow in the illustration.
| 3. REMOVE SEAT TRACK BRACKET OUTER COVER RH |
![]() |
Using a screwdriver, detach the 2 claws.
Remove the inner cover in the direction indicated by the arrow in the illustration.
| 4. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 5. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
Lift up the seat track adjusting handle and move the seat to the foremost position.
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
w/ Seat belt warning, w/ occupant detection sensor:
Disconnect the connector under the seat.
Remove the seat.