FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag) > REASSEMBLY |
| 1. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH |
![]() |
Install the front seat cushion edge protector LH as shown in the illustration.
| 2. INSTALL LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY LH |
Install the lower reclining adjuster arm sub-assembly LH with the 3 bolts.
| 3. INSTALL LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY RH |
| 4. INSTALL SEAT TRACK HANDLE SUB-ASSEMBLY LH |
![]() |
Apply MP grease to the locations shown in the illustration.
![]() | MP Grease |
![]() ![]() |
Attach the 2 springs to install the seat track handle sub-assembly LH as shown in the illustration.
| 5. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH |
Install the front seat cushion frame sub-assembly LH to the lower reclining adjuster arm sub-assembly RH and the lower reclining adjuster arm sub-assembly LH with the 4 bolts.
| 6. INSTALL FRONT SEAT CUSHION PROTECTOR |
![]() |
Install the 2 front seat cushion protectors.
| 7. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.
| *1 | Hog Ring Pliers |
Attach the hooks to install the separate type front seat cushion cover with pad to the front seat cushion frame sub-assembly LH.
![]() |
Bend the 2 front seat cushion frame claws downward.
![]() |
Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.
| *1 | Hog Ring Pliers |
![]() |
Attach the wire harness clamp.
| 8. INSTALL NO. 1 SEATBACK CLOTH |
![]() |
Install the separate type front seatback pad to the separate type front seatback spring assembly.
| 9. INSTALL SEPARATE TYPE FRONT SEATBACK PAD |
![]() |
Install the separate type front seatback pad to the separate type front seatback spring assembly.
| 10. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with new hog rings.

| *1 | Hog Ring Pliers | - | - |
| *a | Front view of front seatback | *b | Rear view of front seatback |
Attach the 4 claws to install the 2 front seat headrest supports.
![]() |
Attach the separate type front seatback cover bracket and install the nut.
![]() |
Pass the straps of the separate type front seatback cover through the holes of the separate type front seatback pad.
![]() |
Using hog ring pliers, attach the 2 straps of the separate type front seatback cover to the separate type front seatback spring assembly with new hog rings.
| *1 | Hog Ring Pliers |
![]() |
Pass the front seat airbag wire harness through the hole of the separate type front seatback cover.
Using hog ring pliers, attach the separate type front seatback cover with new hog rings.
| *1 | Hog Ring Pliers |
| 11. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY |
Install the separate type front seatback assembly with the 4 bolts.
![]() |
Using hog ring pliers, attach the separate type front seat cushion cover and rubber bands of the separate type front seatback cover to the front seat cushion frame sub-assembly LH with new hog rings.
| *1 | Hog Ring Pliers |
![]() |
Attach the 3 front seat airbag wire harness clamps.
| 12. INSTALL SEATBACK SPRING LH |
![]() |
Install the seatback spring LH.
| 13. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Attach the guide and 2 hooks in the order shown in the illustration to install the front seat cushion shield LH.
| *1 | Guide |
| *2 | Hook |
Install the 2 screws.
| 14. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Attach the claw to install the reclining adjuster release handle LH.
| 15. INSTALL FRONT SEAT INNER CUSHION SHIELD LH |
![]() |
Attach the 2 hooks in the order shown in the illustration to install the front seat inner cushion shield LH.
Install the 2 screws.
| 16. INSTALL FRONT SEAT CUSHION COVER LH |
Install the front seat cushion cover LH.
| 17. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
w/ Passenger Seat Belt Warning Light:
Attach the 2 clamps as shown in the illustration.
Connect the connector.
![]() |
Install the buckle cover on the inner belt.
![]() |
Attach the wire harness to the clamp.
Install the seat belt with the nut.
![]() |
w/o Passenger Seat Belt Warning Light:
Install the buckle cover on the inner belt.
Install the seat belt with the nut.