DOOR CONTROL TRANSMITTER > INSPECTION |
| 1. INSPECT DOOR CONTROL TRANSMITTER MODULE |
Inspect the operation of the transmitter.
Remove the battery (lithium battery: CR2016) from the transmitter.
Install a new or non-depleted battery (lithium battery: CR2016).
![]() |
From outside the vehicle, approximately 1 m (3.28 ft.) from the driver side outside door handle, test the transmitter by pointing its key plate at the vehicle and pressing a transmitter switch.
Inspect the battery capacity.
Remove the battery (lithium battery: CR2016) from the transmitter.
![]() |
Connect a wire to the negative (-) terminal of the transmitter and reinstall the battery.
Connect the tester's positive (+) lead to the battery and the negative (-) lead to the wire.
Press one of the transmission switches on the transmitter for approximately 1 second.
Press the transmission switch on the transmitter again to check the voltage.