CENTER AIRBAG SENSOR ASSEMBLY > INSTALLATION |
| 1. INSTALL CENTER AIRBAG SENSOR ASSEMBLY |
![]() |
Temporarily install the sensor with the 3 bolts.
Tighten the 3 bolts.
Check that there is no free play in the installation parts of the sensor.
Connect the sensor connector.
Check that the waterproof sheet is properly set.
| 2. INSTALL CONSOLE BOX ASSEMBLY |
![]() |
Install the console box with the 4 screws and 2 bolts.
Install the 2 clips.
| *1 | Screw |
| *2 | Bolt |
| *3 | Clip |
| 3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
for Manual Transmission:
Attach the 12 claws to install the upper console panel.

| *A | for 2WD | *B | for 4WD |
for Automatic Transmission:
Attach the 12 claws to install the upper console panel.

| *A | for 2WD | *B | for 4WD |
| 4. INSTALL TRANSFER SHIFT KNOB SUB-ASSEMBLY (for 4WD) |
| 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 7. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).