BRAKE ACTUATOR (w/ ABS) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET |
Place tags or marks to identify the installation locations of each brake line.

Release the latch of the actuator connector and disconnect the connector.
Detach the clip from the brake actuator bracket.
Using a union nut wrench, disconnect the 5 brake lines from the brake actuator.

for LHD:
Remove the 3 bolts and brake actuator with bracket.
![]() |
![]() |
for RHD:
Remove the 3 nuts and brake actuator with bracket.