DIFFERENTIAL OIL > ON-VEHICLE INSPECTION |
| 1. DRAIN DIFFERENTIAL OIL |
for front differential:
Stop the vehicle on a level surface.
![]() |
Using SST and the 10 mm straight hexagon wrench, 10 mm union nut wrench and socket adaptor, remove the differential filler plug and gasket.
| *1 | 10 mm Straight Hexagon Wrench |
| *2 | 10 mm Union Nut Wrench |
| *3 | Socket Adaptor |
Remove the drain plug and gasket, and drain the oil.
Install a new gasket and the drain plug.
for rear differential:
Stop the vehicle on a level surface.
Remove the differential filler plug and gasket.
Remove the drain plug and gasket, and drain the oil.
Install a new gasket and the drain plug.
| 2. ADD DIFFERENTIAL OIL |
![]() |
Add differential oil so that the oil level is within 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.
| Temperature | Viscosity |
| Above -18°C (0°F) | SAE 90 |
| Below -18°C (0°F) | SAE 80W-90 or SAE 80W |
| Item | Specified Condition |
| Front differential (4WD) | Hypoid gear oil API GL-4 or GL-5 |
| Rear differential | Hypoid gear oil API GL-5 |
| Item | Specified Condition |
| Standard | 3.30 to 3.40 liters (3.49 to 3.59 US qts., 2.90 to 2.99 Imp. qts.) |
| w/ Differential lock | 2.85 to 2.95 liters (3.01 to 3.12 US qts., 2.51 to 2.60 Imp. qts.) |
| Made for DANA | 2.40 to 2.50 liters (2.54 to 2.64 US qts., 2.11 to 2.20 Imp. qts.) |
Check for oil leakage when the oil level is low.
for front differential:
![]() |
Using SST and the 10 mm straight hexagon wrench, 10 mm union nut wrench and socket adaptor, install a new gasket and the differential filler plug.
| *1 | 10 mm Straight Hexagon Wrench |
| *2 | 10 mm Union Nut Wrench |
| *3 | Socket Adaptor |
for rear differential:
Install a new gasket and the differential filler plug.