Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE AND WHEEL SYSTEM

TIRE AND WHEEL SYSTEM > INSPECTION

for Preparation Click here



1. INSPECT TIRE
  1. Measure the tires for wear and proper inflation pressure.

    Standard cold tire inflation pressure:
    Tire Size
    Front Pressure
    Rear Pressure
    265/65R 17 112S
    210 kPa (2.1 kgf/cm2, 30 psi)
    210 kPa (2.1 kgf/cm2, 30 psi)



    R003031E02
  1. Using a dial indicator, measure the tire runout.

    Standard tire runout:
    3.0 mm (0.118 in.) or less



2. ROTATE TIRE


    C113172E03
  1. Rotate the tires as shown in the illustration.

    Torque:
    105 N*m{ 1071 kgf*cm , 77 ft.*lbf }



3. INSPECT WHEEL BALANCE


C080976E02
  1. Check and adjust the balance of the wheels.

    Standard imbalance after adjustment:
    13 g (0.029 lb) or less



4. INSPECT WHEEL BEARING BACKLASH
  1. Inspect the front wheel bearing backlash (Click here).



5. INSPECT FOR AXLE HUB DEVIATION
  1. Inspect for front axle hub deviation (Click here).