PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT |
| 1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() |
Remove the 2 bolts and heat insulator.
![]() |
Loosen the bolt of the park/neutral position switch and move the shift lever to N.
Align the groove with the neutral basic line.
| *1 | Groove |
| *2 | Neutral Basic Line |
Hold the switch in position and tighten the bolt.
After the adjustment, perform the on-vehicle inspection (Click here).
Install the heat insulator with the 2 bolts.