Home › TRANSMISSION · A343F AUTOMATIC TRANSMISSION › ATF TEMPERATURE SENSOR

ATF TEMPERATURE SENSOR > INSPECTION

for Preparation Click here



1. INSPECT ATF TEMPERATURE SENSOR


C214974E01
  1. Measure the resistance according to the value(s) in the table below.

    Tester Connection
    Specified Condition
    1 - 2
    79 Ω to 156 kΩ
    1 - Body ground
    10 kΩ or higher
    2 - Body ground
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (ATF Temperature Sensor)

    HINT:
    If the resistance is out of the specified range at either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

    Standard Resistance:
    ATF Temperature
    Specified Condition
    20°C (68°F)
    10.3 to 13.9 kΩ
    120°C (248°F)
    0.58 to 0.65 kΩ

    If the result is not as specified, replace the ATF temperature sensor.