Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation and seat belt pretensioner activation.



2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B278222
  1. Detach the 4 claws and remove the parking brake hole cover.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


  1. for Manual Transmission:



    1. Detach the 12 claws and remove the upper console panel.

      NOTICE:
      Be careful not to damage the instrument panel and console box with the claws of the upper console panel.



      B277219E01


      Text in Illustration 
      *A
      for 2WD
      *B
      for 4WD



  1. for Automatic Transmission:



    1. Detach the 12 claws and remove the upper console panel.

      NOTICE:
      Be careful not to damage the instrument panel and console box with the claws of the upper console panel.



      B277220E01


      Text in Illustration 
      *A
      for 2WD
      *B
      for 4WD



4. REMOVE CONSOLE BOX ASSEMBLY


B278048E01
  1. Remove the 4 screws and 2 bolts.

  1. Using a clip remover, remove the 2 clips and console box.
    Text in Illustration 
    *1
    Screw
    *2
    Bolt
    *3
    Clip



5. REMOVE FLOOR SHIFT ASSEMBLY


G034271E01
  1. Disconnect the 2 connectors and clamp.

  1. Move the shift lever to L.

  1. Disconnect the transmission control cable.



    G034272E01
  1. Remove the 4 bolts.

  1. Remove the floor shift.